Docomo L-06A Prime Series, Инструкция по эксплуатации

Страница: 354 / 553

Convenient Functions
• If you leave the FOMA terminal for approximately 1 minute
without any operations, alarm tone stops. If the snooze is set,
the alarm tone repeatedly sounds 12 times at approximately
5-minute intervals. (5 minutes regardless of the setting of the
snooze interval time)
Schedule
The Schedule alarm screen appears, the alarm tone sounds and
the illumination lights up.
• To stop the alarm, press
C
[OFF] and then
C
[OFF] on the
Schedule detail screen. (Perform the same when Snooze is set)
• To sound the alarm tone again, select
I
[Snooze] ▶ select a
snooze interval.
• If you leave the FOMA terminal for approximately 1 minute
without any operations, alarm tone stops. Then, the alarm tone
repeatedly sounds 12 times at approximately 5-minute interval.
• If you press
P
or close the FOMA terminal, the alarm tone
will stop temporarily. Then, the alarm tone repeatedly sounds at
approximately 5-minute interval.
To do
The To do alarm screen appears, the alarm tone sounds, and the
illumination lights up.
• To stop the alarm, press
C
[OFF] and then
C
[OFF] on the To
do detail screen.
• If you leave the FOMA terminal for approximately 1 minute
without any operations, alarm tone stops. Then, the alarm tone
repeatedly sounds 12 times at approximately 5-minute interval.
• If you press
P
or close the FOMA terminal, the alarm tone
will stop temporarily. Then, the alarm tone repeatedly sounds at
approximately 5-minute interval.
When the Alarm and Schedule/To do alarms are set at the same
time
The priority order for the alarms is Alarm → Schedule alarm → To
do alarm.
Schedule
Managing Schedules
Registering Schedule Events
You can register schedule events such as a meeting or
appointment. Up to 200 schedule events can be saved.
a
Stand-by display ▶
U
▶ Move the cursor to
the day to save in Schedule ▶
I
[New] ▶
"General"* ▶ Perform the following operations
* If the 1Seg channel setting is not made, you do not perform
the operation to select "General".
• Select "1Seg Booking" to set time for starting 1Seg.→P248
• When the cursor is on the date and time setting field, you can
cancel creating a schedule event by pressing
g
[Cancel] ▶
"Yes".
[ Subject]
Up to 25 full-pitch or 50 half-pitch characters can be entered. Up to
2 subjects are displayed at the bottom of the Monthly view screen.
Subject is required to register a schedule event. The subject is also
displayed on the Alarm screen that appears when the alarm sounds.
[ (Time)]
Set the date and time to start/end the schedule event.
All day : Register the schedule event for a whole day without
specifying time.
Set time
: After setting, use
D
to move the cursor to the date and
time field and enter the start and end date and time of
the schedule event.
• The end time cannot be set earlier than the start time.