Docomo L-06A Prime Series, Инструкция по эксплуатации

Страница: 105 / 553

0
Sound/Screen/Light Settings
Select effect tone
Setting Effect Tone
You can set the effect tone when a key is pressed or
operation is performed.
a
M
▶ "Settings" ▶ "Sounds&Vibration" ▶
"Select effect tone"
Effect tone
selection screen
b
Perform the following operations
[Keypad tone]
*
Select an effect tone when a key is pressed except Dial sound.
[Slide tone] *
Select an effect tone when the FOMA terminal is slid up/down.
[Dial sound]
*
Select an effect tone when a dial key,
*
, or
#
is pressed in the
Stand-by display or the Phone number entry screen (P56). If set to
"Japanese", "English", or "Korean", the numbers entered with dial keys
will be read out.
[Power ON]
Select an effect tone when the terminal is turned on.
Music : Select from Chaku-Uta Full
®
songs saved in "Music" of
"Data box".→P270
Go to Step 3 in "Setting a Chaku-Uta Full
®
Song as a Ring
Tone" (P266).
Melody : Select from melodies saved in "Melody" of "Data box".
→P314
[Power OFF]
Select an effect tone when the terminal is turned off.
• Available items are the same as for "Power ON".
[Low battery alert]
Set whether to sound an alarm when the battery level becomes low.
* On the selection screen of the setting item, press
T
[Play] to
check the sound each time an effect tone is selected. To mute the
sound, press
T
[Mute]. If "Silent" is set for "Volume", an effect tone
cannot be checked.
c I
[Done]