Docomo L-06A Prime Series, Инструкция по эксплуатации

Страница: 199 / 553

i-mode/i-motion/i-Channel
Mail To Function
You can send a mail to an i-mode mail address highlighted on
a site page or in mail.
a
Select a mail address
Go to Step 3 in "Composing and Sending i-mode Mail" (P138).
Note
• The Mail To function may not be available depending on the
site.
Web To Function
Access a URL highlighted on a site or in mail.
a
Select a URL
• For mail, further press
C
[Connect].
Note
• The Web To function may not be available depending on the
site.
• The appearance of the URL varies depending on the site.
• The Web To function may be available using a highlighted item
other than a URL.
Media To Function
You can watch 1Seg or set timer for starting 1Seg.
a
Select 1Seg information ▶ "Yes"
Note
• The Media To function may not be available when other
functions are running.
i-αppli To Function
You can start i-αppli from a URL highlighted on a site or in
i-mode mail.
• If "Set i-αppli To" (P285) or "Mail i-αppli To" in "Set i-αppli To" is not
marked, the i-αppli will not start.
a
Select i-αppli information ▶ "Yes"
Note
• Some i-αppli, which immediately start directly from the site
using the i-αppli To function, may not be saved.
i-mode setting
Setting i-mode
Set functions of i-mode or MessageR/F.
Communication
Configuring Communication Settings
a
i-mode menu screen (P182) ▶ "i-mode setting"
▶ "Communication" ▶ Perform the following
operations
[Connection timeout]
Set the timeout duration until the connection is automatically
terminated if there is no response due to network traffic.→P199
[Check new messages]
Specify request items when using "Check new messages".
▶ Mark the items to check ▶
I
[Done]