Docomo F-08d, Инструкция по эксплуатации

Страница: 31 / 171

Before using the terminal
29
❖
Available charging adapter
For details, refer to the operation manual of AC adapter or
DC adapter.
FOMA AC Adapter 01 (optional) : 100V AC only
FOMA AC Adapter 02/FOMA AC Adapter 01 for Global
use/Adapter 03 (optional) : Between 100V and 240V AC.
AC Adaptor has a plug dedicated to 100V AC (for use in
Japan). When using the AC adapter in the range of AC
100V and 240V overseas, a conversion plug adapter
applicable to the country you are staying is required.
Also, do not charge the battery with a transformer for
overseas travel.
FOMA DC Adapter 01/FOMA DC Adapter 02/DC Adapter
03 (optional) : Use for charging in a car.
❖
Checking battery level
A battery icon is displayed on the status bar to show
estimated battery level.
→
P36
･
From the Home screen,
m
→ Tap [Settings] → [About
phone] → [Status] to check the remaining battery power
by percentage.
✔
INFORMATION
･
When charging starts with the battery empty, the
terminal may not be immediately activated after turning
the power ON. In this case, charge the terminal while
keeping it turned OFF, and turn it on after a while.
･
Right after the battery pack is removed and reattached,
the correct battery level may not be shown. While using,
the battery level indicator is corrected.
◆ Setting for charging with Desktop
Holder
When charging with the included Desktop Holder F37,
make sure the setting before charging.
･
For charging without the Desktop Holder, changing the
setting is not needed.
1
From the Home screen,
m
→ [Settings]
→ [Initial settings] → [Desktop holder charge
setting]
→
Select charging mode
Quick charge(AC adapter) : Select for quick charging
with AC adapter connected.
Regular charge(USB charge) : Select for regular
charging with the AC adapter connected or
charging with a PC connected via USB cable.
◆ Charging with Desktop holder
Use FOMA AC Adapter 01/02 (optional), included FOMA
charging microUSB adapter T01 and Desktop Holder F37
to charge.
a
Insert the AC adapter connector to the external
connection jack of the charging microUSB adapter
b
Insert the microUSB plug of the charging microUSB
adapter into the jack on the back side of the desktop
holder
c
Unfold the AC adapter's power plug and insert it into
an AC outlet
d
Insert the terminal into the desktop holder
･
Notification LED lights red while charging, and turns
off when charging is complete.
e
When charging is complete, remove the terminal from
the desktop holder, and remove the AC adapter's
power plug from the wall outlet