Docomo F-08d, Инструкция по эксплуатации

Страница: 13 / 171

Contents/Precautions
11
◆ Handling docomo mini UIM card
CAUTION
Be careful of the cut surface when removing
docomo mini UIM card.
May cause injuries.
◆ Handling mobile phones near
electronic medical equipment
■ These precautions are based on the guidelines
produced at the Electromagnetic Compatibility
Conference Japan, regarding the protection of
electronic medical equipment from radio waves
emitted by mobile phone units.
WARNING
Obey the following rules inside medical
facilities.
･
Do not bring the terminal into operating rooms
(ORs), intensive care units (ICUs) or coronary care
units (CCUs).
･
Turn the terminal OFF in hospital wards.
･
Turn the terminal OFF in hospital lobbies and corridors
if electronic medical equipment could be nearby.
･
If the medical facility has specified zones where use
or possession of mobile devices is prohibited, obey
those instructions.
Turn the terminal OFF in crowded trains or
other public places where pacemaker or
defibrillator wearers could be nearby.
The terminal's signals may affect the operation of
implanted pacemakers or defibrillators, and other
devices.
Wearers of medical equipment such as
implanted pacemakers or defibrillators must
carry and use the terminal at least 22 cm
away from the implanted device.
The terminal's signals may affect the performance of
electronic medical equipment.
When electronic medical equipment other
than implanted pacemakers or defibrillators
are in use outside of medical facilities (such
as in home care settings), check with the
device manufacturer to determine how the
device is affected by electrical signals.
The terminal's signals may affect the performance of
electronic medical equipment.
◆ Material list
Do
Do
Do
Do
Part Material
Surface
treatment
Exterior
case Front case PA-GF resin UV hard
coating
Back case PC-GF resin UV hard
coating
Back cover PC-GF resin UV hard
coating
Inside of back
cover Silicon rubber None
Display panel Hardened glass Shatterproof
film
Receiver panel High-strength
acrylate resin UV hard
coating
1Seg
antenna Antenna top PC/ABS resin UV hard
coating
Antenna rod Stainless steel None
Antenna
holder Zinc die-cast Ni plating
1Seg antenna installing
metal plate Stainless steel Ni plating
1Seg antenna fixing
screw Stainless steel None
Do