DJO Global Artromot Active-K Скачать руководство пользователя страница 67

Страница: 67 / 75

glis

The ARTROMOT®-K1 device is subject to par-

ticular precautions regarding electromagnetic

compatibility (EMC). The device must be installed

and put into service strictly in compliance with

the EMC directives set forth in the accompanying

documents.

Portable and mobile RF communication systems

may affect the ARTROMOT® ACTIVE-K.

The ARTROMOT® ACTIVE-K should not be used

adjacent to or stacked with other equipment. If

adjacent or stacked use is necessary, ARTROMOT®

ACTIVE-K should be observed to verify normal

operation in the configuration in which it will be

used.

If you detect damage or malfunctions that may

impair the safety of the patient or of the operator,

have the device repaired before using it.

If it is necessary to replace assemblies or cables,

only the manufacturer's original parts must be

used to ensure continued compliance with EMC

requirements after repair. This requirement ap-

plies to the power supply unit, cables and cable

lengths, drive unit consisting of the motor and

the control system, the programming unit incl.

the coiled cable and the connector.

The product designation ARTROMOT® ACTIVE-K

used in the text below includes all product

variants.

10. IEC 60601-1-2:2007 and IEC 60601-1-11:2010

10.1 Electromagnetic emissions

Guidance and Manufacturer’s Declaration – Electromagnetic Emissions

ARTROMOT® ACTIVE-K

is intended for use in the electromagnetic environment specified below. It

is the responsibility of the customer or user to ensure that the

ARTROMOT® ACTIVE-K

unit is used

in such an environment.

Emissions test

Compliance

Electromagnetic environment - guidance

RF emissions to CISPR 11

Group 1

ARTROMOT® ACTIVE-K uses RF energy only

for its internal function. Therefore, its RF

emissions are very low and are not likely to

cause any interference in nearby electronic

equipment.

RF emissions to CISPRH 11

Class B

ARTROMOT® ACTIVE-K is suitable for use in all

establishments, including domestic and those

directly connected to the public low-voltage

power supply network that supplies buildings

used for domestic purposes.

Harmonic emissions to

IEC 61000-3-2

complies with class

A requirements

Voltage fluctuations/flicker

emissions to IEC 61 000-3-3

complies

Supplied by EME Services Ltd

Содержание Artromot Active-K












































































Результаты поиска

Содержание Artromot Active-K

Отзывы:

Похожие инструкции для Artromot Active-K

Бренды по названию

Популярные бренды

DJO Global Artromot Active-K, Руководство по эксплуатации

Результаты поиска

Содержание Artromot Active-K

Отзывы:

Похожие инструкции для Artromot Active-K

Бренды по названию

Популярные бренды