DJO Global Artromot Active-K Скачать руководство пользователя

Страница: 29 / 75

glis

Flexion force range

The force range can only be set for the functions "Maintain force, static" and

"Maintain force, dynamic".

With these functions, the patient is prompted to maintain a random force for

3 seconds while the carriage is moving in the flexion direction.

The range from which the force will be selected, is set under Flexion Force

Range.

The parameters to define are the intensity and direction of the force.

The force range can be adjusted between -30 kg and +30 kg in steps of 1 kg.

Adjustable values:

0 kg =

passive mode, flexion The patient is not required to

exercise actively.

1 to 30 kg =

limits of the force range from which a random resistance

is selected that the patient is required to overcome

actively opposite to the direction of motion (push) so as

to move the carriage in the flexion direction.

-1 to -30 kg =

limits of the force range from which a random resistance

is selected that the patient is required to overcome ac-

tively in the direction of motion (pull) so as to move the

carriage in the flexion direction.

Note

– The option "Hi limit = Lo limit" means that the same force setting is perma-

nently set and that the requested force will not alternate.

– It is not possible to select a setting beyond 0 (one positive and one nega-

tive value). During flexion, the patient is always required either to push in

the opposite direction of motion or to pull in the direction of motion.

Supplied by EME Services Ltd

Содержание Artromot Active-K












































































Результаты поиска

Содержание Artromot Active-K

Отзывы:

Похожие инструкции для Artromot Active-K

Бренды по названию

Популярные бренды

DJO Global Artromot Active-K, Руководство по эксплуатации

Результаты поиска

Содержание Artromot Active-K

Отзывы:

Похожие инструкции для Artromot Active-K

Бренды по названию

Популярные бренды