DITTING KE640 2.0, Оригинальное руководство пользователя

Страница: 32 / 40

32
Single eSpreSSo grinder
Error Cause Remedy
The grinder is
not grinding,
the display is
not lit up.
• The power plug
is not plugged
into a socket.
t Insert the mains plug into a properly
installed wall socket.
• The thermal
overcurrent
circuit-breaker
has been trig-
gered.
t Check whether the overcurrent
circuit-breaker’s release button
has popped out. Push it back in
if necessary. If the overcurrent
circuit-breaker repeatedly pops out,
contact your supplier (see chapter
“Maintenance and service”).
• The electrical
fuse has
tripped.
t
Check the electrical fuse. Bring it
back to its original state or replace
the electrical fuse. Check whether
other loads are connected to this
fuse and if so, pull their plugs. If
the back-up fuse trips repeatedly,
contact your supplier (see chapter
“Maintenance and service”).
The grinder is
not grinding
fine enough.
• The grinding
discs are worn
out.
t
Contact your supplier (see chapter
“Maintenance and service”).
• The grinding
discs are not
aligned cor-
rectly.
t
Contact your supplier (see chapter
“Maintenance and service”).