DITTING KE640 2.0, Оригинальное руководство пользователя

Страница: 16 / 40

16
Single eSpreSSo grinder
Operation
INFORMATION!
Danger of overheating!
Exceeding the maximum permissible operating cycle can cause the
grinder to overheat.
– Do not exceed the maximum operating cycle
(see chapter “Technical data”).
– Observe the recommended pause when the maximum permis-
sible operating cycle is reached (see chapter
“
Technical data
”
).
INFORMATION!
Risk of damage!
The operator has no influence on the thermal overcurrent circuit-
breaker. If the thermal overcurrent circuit-breaker has been triggered
several times, a service partner must be contacted for advice as the
motor winding can become damaged.
• The grinder has a thermal overcurrent circuit-breaker which
interrupts the electric circuit of the grinder in case of electri-
cal overload. To put the grinder into operation again, first set
the on/off switch (19) to switch position 0 (off) and discon-
nect the power plug (18) . Then press the release button (17) .
You can now plug the power plug back into the socket and
put the grinder into operation (see chapter “Switching on the
grinder").
• The grinder also has a motor protector, which switch-
es off the grinder when the motor becomes too hot.
As soon as the motor has cooled down, the grinder can be put into
operation again (see chapter: “Troubleshooting”).