DITTING KE640 2.0, Оригинальное руководство пользователя

Страница: 10 / 40

10
Single eSpreSSo grinder
Safety
Intended use
The grinder is only suitable for grinding whole roasted espresso beans. Do
not use the grinder to grind other products or objects. It is intended for
commercial use and may only be serviced by trained personnel. It may,
however, be operated by other persons in a place where use is supervised.
Any other use is not considered to comply with intended use and can result
in material damage or even personal injury. Do not make any changes to the
grinder. The manufacturer or the supplier shall not be held liable for any injury
or damage resulting from non-compliance with the safety instructions.
Safety information
WARNING!
Danger of electrocution!
Improper use, incorrect electrical installation or a voltage that is too
high can all lead to electrocution.
– Connect the grinder only if the mains voltage of the socket
complies with the information indicated on the nameplate.
– Only connect the grinder to a socket with good accessibility so
that you can disconnect it quickly from the power supply in the
event of any hazardous incident.
– Do not use the grinder if you notice any visible damage or if the
power cable or plug is faulty.
– If the power cable for the grinder is damaged, it must be re-
placed by the manufacturer or by qualified personnel in order
to avoid hazards.
– Connect the grinder only to a power supply with a 16 A-slow
back-up fuse or a 15 A load switch.
Have the 16 A-slow back-up fuse or 15 A load switch fitted by a
qualified electrician if the power connection at the site of instal-
lation of the grinder is not secured in this way.
– Install the grinder only in places where the handling of the
grinder can be supervised by trained personnel.