DITTING KE640 2.0, Оригинальное руководство пользователя

Страница: 14 / 40

14
Single eSpreSSo grinder
Setting up the grinder and inserting the bean container
INFORMATION!
Risk of damage!
Improper use can lead to damage to the bean container.
– Make sure during installation to position the bean container
in such a way that the locking screw for the bean container
reaches into the appropriate recess of the bean container when
screwing in. If you do not position the bean container correct-
ly, you may damage the bean container when screwing in the
locking screw.
For grinders designed for mains voltage ranges of 200–230 V or
220–240 V, the locking screw for the bean container is a hexagon
socket screw. Use the 2 mm Allen key supplied with this model
to fix the bean container.
For grinders designed for a mains voltage range of 100–127 V,
the locking screw for the bean container is a slotted screw. Use
a slot screwdriver to fix the bean container (not included in
delivery).
1. Place the grinder on a level and stable surface that does not vibrate to
prevent it from falling off.
2. Make sure that the rubber ring
(20)
has been properly placed in the bean
container intake (3) and is lying flat (see Fig. C ).
3. Place the bean container (1) onto the bean container intake.
In doing so, make sure that the pins in the bean container intake catch
the corresponding grooves on the bean container and the recess for the
locking screw on the bean container aligns in the direction of the locking
screw on the bean container intake.
4. Keep pressing down lightly on the bean container and turn the bean con-
tainer clockwise so that it clicks into the bean container intake.
5. Use a slot screwdriver or the 2 mm Allen key supplied to screw the lock-
ing screw
(2)
for the bean container clockwise until finger-tight. Make
sure not to screw the locking screw too tightly. The locking screw should
be level on the bean container intake.