Dish Network DuoDVR ViP 622, Руководство пользователя

Страница: 24 / 170

Satellite Receiver
15
Remote Control
Switching Between Dual and Single Mode
Put the satellite receiver in Single or Dual Mode by pressing the front-panel MODE button.
Keep the following things in mind when switching the satellite receiver between Dual and
Single Mode:
Note: If someone is viewing the remote TV(s) while the receiver is in Dual Mode, you will
see a pop-up message screen on the nearby TV, warning you that you are about to disrupt
the use of the TV2 outputs.
R
EMOTE
C
ONTROL
The two remote controls give you access to all the features of your dual satellite-tuner
receiver. You can set up each remote to control the satellite receiver and up to three other
devices (see page 78). These devices can be a TV, a VCR or DVD player, and a third
(AUX) device.
This section describes how to use the various features on the two types of remote controls
included with your satellite TV system.
Dual Mode Single Mode
Indications
Dual Mode front panel
indicator lights. Single Mode front panel
indicator lights.
Recording The Recording front-panel
indicator lights to show
whether TV1, TV2, or both
are currently recording. The TV1 Recording front-
panel indicator lights when
you are recording from one
or both tuners.
Favorites
Lists Favorites Lists set up for
both outputs (TV1 and TV2)
are available. Only Favorites Lists set up
for TV1 are available. The
lists for TV2 are not lost,
they are simply unavailable
while in Single Mode.
Locks Locks set up for both outputs
(TV1 and TV2) are available. Locks set up for only TV1
are available. The locks for
TV2 are not lost, they are
simply unavailable while in
Single Mode.
Closed
Captioning Closed Captioning (CC)
from SD and HD
programming is available on
TV1. CC from only SD
programming is available on
TV2 (CC also must be
enabled on the TV itself). Closed Captioning from the
receiver is available on
both outputs (TV1 and
TV2).