Dish Network DuoDVR ViP 622, Руководство пользователя

Страница: 101 / 170

92
Using Shared View
Chapter 11
U
SING
S
HARED
V
IEW
Shared View is a feature of Single Mode that lets you activate the TV2 audio and video
outputs to display the same programming as the TV1 outputs. While using this feature,
both Remote Control 1 and Remote Control 2 for your satellite receiver can control what is
displayed on all TVs connected to the system. This feature is available only in Single
Mode.
Note 1: Make sure you are using Remote Control 1 and TV1 because you cannot enable
or disable this feature using Remote Control 2.
Note 2: If you do not want to display programming on any other TV besides TV1 and you
do not want Remote Control 2 to control the receiver, select Disable View. After you
select Done, TV2 will show a screen that says Shared View is currently disabled.
M
ODULATOR
S
ETUP
If you have TV1 and TV2 connected to the satellite receiver with coaxial cables (see
page 107), you can decide which channel you’d like to use to view your DISH Network
programming. If you have the system locked, then you’ll have to enter the password to
enable TV1’s output on this screen. Make sure that your TV can tune to the channel
number you pick before you saved changes to the settings on this screen.