Dish Network DuoDVR ViP 622, Руководство пользователя

Страница: 131 / 170

122
Using Troubleshooting Tools
Chapter 12
Point Dish and Check Switch
The Point Dish and Check Switch screens are often helpful to the Customer Service
Representatives. You may be asked to display these screens when you contact DISH
Network. Even though there are items that can be changed, only change them when
specifically directed to do so when speaking to a Customer Service Representative.
Warning: Running the Check Switch test while the receiver has low or no signal
will result in incorrect receiver settings and cause you to lose channels. Do not run
a Check Switch test unless directed to do so by a DISH Network Customer
Service Representative or technician’s instructions.
1
Press the MENU button on the receiver front panel or remote control.
2
Select System Setup.
3
Select Installation.
4
Finally, select Point Dish. This screen shows you information to help maximize your
satellite TV signal. The bar at the bottom of the screen indicates the signal strength. Green
shows a good signal, yellow is a marginal signal, and red indicates the signal is not
acceptable or is from the wrong satellite transponder or orbital location.