8
5. Buzzer
Use this setting to choose whether you want to hear a beep when you press a button and
when a task has been completed.
6. Startup Menu
Use this setting to choose which menu you would like to see first when you turn on the
autoloader.
7. Screen Saver
Use this setting to enable or disable the Screen Saver feature. When this is enabled, a
screen saver is displayed whenever your autoloader has been idle for a long period of time.
8. Counter
Use the Counter menu to enable or disable the Counter feature. The counter tells you how
many discs have been copied and how many discs are left to go during the progress and it
will stop the job once the desired number of copies has been made.
9. AUTOCOPY Enabled
This menu option turns on the hidden 16.AUTOCOPY main menu option. The AUTOCOPY
function simplifies the copy process by allowing you to stack blank media on a spindle(s),
place the master on top of the stack on the first spindle, and press the Enter button on
16.AUTOCOPY key in the main menu. It will load the content of the top disc of the 1
st
input
spindle (master disc) into the Reserved Partition of the Hard Drive and copy it to blank
disc(s) below it and other input spindle(s) if exists.
10. DVD+R Compatibility Mode
This feature allows you to turn the DVD+R High Compatibility Mode feature ON or OFF.
The purpose of this feature is to increase the compatibility of DVD+R media with a broader
range of DVD Video players.
11. Disable Drives
Use this utility to allow the system to disable certain drives/trays when certain drives/trays
are producing high failure rates. See Disable Drives on page 32.
12. System Utilities
page 33
1. Disc Info
Use the Disc Info utility to identify the type of blank recordable media. This utility identifies
your blank recordable Media's format, capacity, manufacture ID, and the Media's certified
writing speed.
2. System Info
Use this menu option to see data about the autoloader and its resources (firmware version,
RAM and CPU).
3. Device Info
Use this menu option to see data about the drives that are installed in the autoloader.
4. Load Default
Use this menu option to reset all of the options back to the manufacturer's default values.
You can use this function if your autoloader is acting abnormally.
5. Update Firmware
Use this utility to update the software in your autoloader. To update, insert the
manufacturer s Certified Update CD into the 1
st
tray and make sure no other discs are in
rest of the trays. Then you can press the Enter button to update.
