background image

 

24 

ReflexAuto     B.30

 

1. Copy         (SM)

 

ReflexAuto     B.30

 

10. Hard Drive Setup

 

Hard Drive Setup 
1. Select Partition

 

 

Choose Partition 
 1->[RESERVED] CD 

 

Choose Partition 
 2->[FUN     ] CD 

 

10. Hard Drive Setup  

The Hard Drive Setup menu consists of following sub-menus:   

Select Partition  

Load Partition  

Rename Partition  

Delete Partition  

Partition Info  

Partition Size  

Format Hard Drive  

Each of these menus is discussed in it s own subsection.   

If you are at the 1. Copy Menu, do the following:   

Use the Up or Down button to find the 10. Hard Drive Setup.    

Press the Enter button on 10. Hard Drive Setup to enter the menu. Use the 
Up or Down button to select between those options.   

10.1 Select Partition  

The Select Partition submenu is used to select the partition on the Hard Drive that will be used as the default 
partition choice for various Hard Drive related tasks.   

Press the Enter button to enter the Select Partition menu.     

Use the Up or Down button to select the desired partition. The RESERVED 
partition is reserved for use by the System under Multi-Master mode.     

Press the Enter button to select the desired partition (named FUN in this ex-
ample).     

Содержание ReflexAuto 8














































Отзывы: