Disc Makers ReflexAuto 8 Скачать руководство пользователя | Manualshive

Страница: 14 / 45

background image

14

ReflexAuto B.30

1. Copy (SM)

ReflexAuto B.30
8. Master Mode (MM)

Master Mode:
Multi Master

Master Mode:
Single Master

Chapter 2: Operation

This chapter shows each of the menu options and how they are used.

1. Copy

The Copy menu option or the front panel Copy quick key have two different modes of operation:

Single Master Mode: This mode requires that a single master disc is loaded onto the hard drive
prior to initiating the duplication process. This mode is ideal if your job involves one or very few
master disc(s).

Multi Master Mode (Batch Mode): This mode does not require you to manually load your master.
Simply place the master disc(s) on top of the stack of blank discs needed for that particular job of
the master disc. This mode is ideal if you have numerous master discs and fewer copies for each
master disc.

These modes are described in detail in Single Master and Multi Master Modes on page 10. If you are
making copies in Single Master Mode, continue on to the next section. If you are making copies in Multi
Master Mode, jump ahead to Making Copies in Multi Master Mode on page 16.

1.1 Making Copies in Single Master Mode

This process will copy your master disc on to several blank discs simultaneously. This mode requires that
your master disc is loaded into a partition on the Hard Drive. See Load Partition on page 25 for instructions
on how to do this.

Turn on your autoloader and wait until it has booted up. It should take several minutes for the autoloader to
go through its self adaptive test and auto-calibration procedures. You should see the following signifying
your autoloader is ready:

Make sure the Master Mode is set to Single Master mode (SM). If it is not,
use the Up or Down button to navigate to the 8. Master Mode screen. If it is
already in Single Master mode (SM), please skip to the step that starts the
copy process.

Press the Enter button to enter the Master Mode Menu and you will see a
screen similar to one of the following:

Use the Up or Down button to select Single Master Mode. Press the Enter
button to submit your selection.

«
...
12
13
14
15
16
...
»

Содержание ReflexAuto 8














































Отзывы:

Нет отзывов

Похожие инструкции для ReflexAuto 8

Бренд: Sony Страницы: 50

DVD/CD Duplicating Towers without Hard Drive

Бренд: Adtec Страницы: 2

ImageExpress-IT1100

Бренд: ureach Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды