1
Chapter 1: Overview
1. Welcome
The Disc Makers ReflexAuto autoloader is a reliable, high performance, high speed, standalone, robotic
DVD and/or CD autoloader. With its professional industrial design and simple user interface, it makes your
duplicating experience easier than ever.
With the Disc Makers ReflexAuto, you can have a capacity from 100 to 1000 discs, duplicate continuously
for 24 hours (even with multiple masters), and get the highest quality duplication, all at an extremely
affordable price. The Disc Makers ReflexAuto is the most reliable and affordable autoloader on the market.
Before you start using this autoloader, please read the following to ensure proper operation:
DVD Duplication Limitations
The DVD autoloader will not copy any DVDs that have Copy Protection encoded in the content. Typically,
most DVDs you purchase or rent from a store contains Copy Protection.
In addition to the copy protection limitation, the autoloader will only copy a DVD5 format (4.7 GB) disc to
another DVD5 format recordable DVD media. If your autoloader has double layer/dual layer capability, you
can copy a DVD9 format (8.5 GB) disc to another DVD9 format recordable DVD media, but you cannot
duplicate a DVD5 format disc on to a DVD9 format recordable media or vice versa.
Temperature Warning
If the autoloader was stored in a location where the temperature dropped below 32° F (0° C) within the past
24 hours, leave the autoloader in a warm room with temperatures at least 65° F (19° C) for four hours prior
to powering it on for the first time. Failure to do so may cause irreparable harm and prevent the autoloader
from functioning.
Maintenance
It is very important to operate and keep the autoloader in a dust free, clean environment since dust is the
number one killer of CD/DVD recording devices. Failure to do so can severely damage your autoloader. We
strongly suggest that you constantly use an Air Duster (Canned Air) to clear off any dust on the surface of
the autoloader.
Note: Do not try to use an Air Duster to clean the autoloader while the writer trays are open. In doing so, you
may inadvertently blow dust into the recording device and damage it.
Proper Shutdown
To avoid possible system failures, you need to shut down the autoloader properly. To shut down the
autoloader use the Shutdown hot key and follow the instructions on the screen. Not performing this
function increases the risk of damaging the autoloader.
