Dinolift Dino 95T, Руководство по эксплуатации

Страница: 25 / 88

DINO 95T
25
11.1 OPERATING THE LIFT FROM THE CHASSIS
PANEL
10. Turn the selector switch (1) to position 1b
- nyt voit ajaa puomistoa alahallintavivuista 6, 7, 8 ja
työkoria vivusta 9. Puomiston liikkeitä ajettaessa tulee
samalla kääntää vivusta 4 (I/ II – nopeus)
- test the operation of the emergency descent system as
follows:
1.
Start by lifting the boom about 1 – 2 metres (with lever
7) and continue by extending the telescope 1 – 2 metres
(with lever 8) keeping the emergency stop button
depressed. The movement should now stop.
2.
Open the emergency descent valve for the telescope by
turning the lever 27 clockwise and retract the telescope completely
by pumping with hand pump 28. The crank for the hand pump is
located at the side of the chassis control panel (see adjacent picture).
3.
Open the emergency descent valve for the boom by turning the lever
27 counter-clockwise and lower the boom by pumping with hand
pump 28.
4.
Close the emergency descent valve by turning the lever 27 to its
centre position
5.
Pull up the emergency stop button.
DO NOT DAMAGE THE TOW-BAR JOCKEY WHEEL!
Lock the selector switch (1) in position 1a before working
under the boom.
Make sure that neither people nor load are on the platform.