Dinolift Dino 95T, Руководство по эксплуатации

Страница: 55 / 88

DINO 95T
55
19.2 DAILY INSPECTION (START-UP INSPECTION)
To be always performed at a new work site and in the beginning of every working day.
The inspection is performed by the user.
In the inspection attention shall be paid to the following issues:
–
establish the load-bearing capacity of the ground (see point "Start-up and ground stability")
–
verify the standing stability of the lift
–
control the due operation of the position indicator
–
test the operation of the emergency stop system both from the platform and the chassis control
panels.
–
test operation of the emergency descent system
–
test the alarm signal
–
check signal light for outrigger limit-switches (11)
–
check the operation and cleanliness of the lights and reflectors
–
check the condition of the operating controls and test all work movements
–
check the condition of the access routes, the platform gate and the handrails
–
check the limit switches, which prevent the operation of the boom movements (refer to the
service instructions)
–
check the limit switch, which prevents the operation of the outrigger (refer to the service
instructions)
–
check the hydraulic system for tightness
–
test the brakes
–
check the unit visually
–
observe the location of nearby power lines (see point "General safety regulations")