Dinolift Dino 95T, Руководство по эксплуатации

Страница: 35 / 88

DINO 95T
35
17 PREPARING THE LIFT FOR TRANSPORT
1.
Retract the telescope boom completely.
2.
Check that the platform is perpendicular to the boom.
3.
Lower the boom/platform onto the support on the tow-bar and turn the platform floor against
the transport support.
- the limit switch on the transport support prevents operation of the support outriggers,
if the platform is not down
4.
Close the cover on the platform control panel.
5.
Turn the selector switch 1 to position 1b.
6.
Lift the support outriggers.
- at first the rear support outriggers (do not damage the rear lights)
- then the front support outriggers (do not damage the jockey wheel)
8.
Apply the parking brake.
9.
Make sure that the driving device is disconnected.
10.
Turn the selector switch 1 to position 1a and disconnect the lift from the power supply.
11.
Make sure that the covers are locked.