Dinolift Dino 95T, Руководство по эксплуатации

Страница: 21 / 88

DINO 95T
21
10
MEASURES TO BE TAKEN IN CASE OF EMERGENCY/AT RISK OF
LOSING THE STABILITY
Reduced stability can be caused by a fault in the lift, the wind or other lateral force, collapse of the
standing base or negligence in providing sufficient support. In most cases one sign of reduced
stability is the inclination of the lift.
WHEN AT RISK OF LOSING THE STABILITY
1.
If there is time, try to find out the reason for the reduced stability and the direction of its
effect. Warn other people on the work site using the alarm signal.
2.
If possible, reduce the load from the platform in a safe manner.
3.
Reduce the outreach to the side by retracting the telescope. Avoid abrupt movements.
4.
Turn the boom away from the danger zone, i.e. to a position where the stability of the lift is
normal.
5.
Lower the boom.
If the stability has been lost as a result of a fault in the lift, repair such a fault immediately.
Do not use the lift until the fault has been repaired and the condition of the lift has been
verified.
IN CASE OF OVERLOADING
1.
If there is time, try to find out the reason for the reduced stability and the direction of its
effect. Warn other people on the work site using the alarm signal.
2.
If possible, reduce the load from the platform in a safe manner.
3.
Reduce the outreach to the side by retracting the telescope.
IN CASE THE POWER SUPPLY IS INTERRUPTED (power unit/combustion engine)
1.
Lower the boom using the emergency descent system (see point “Emergency descent system”)
2.
Establish the reason why the energy supply was interrupted.
IN CASE OF MALFUNCTION, WHEN EVEN THE EMERGENCY DESCENT SYSTEM IS
NOT OPERATIONAL
1. If the emergency descent system does not operate, try to warn other personnel present on the
site or call for help so that the power supply required for normal operation can be resumed or the
lift can be made operational by some other means so that the person on the platform can be
lowered safely down.