Dinolift Dino 95T, Руководство по эксплуатации

Страница: 66 / 88

DINO 95T
66
FAULT REMEDY
14. Outrigger does not stay in the transport position (see illustration)
Load regulation valve on the rod side is leaking. Measures as above.
15. Driving device does not operate though the selector switch is in position 1b
Boom does not rest on the transport support. Drive the boom onto the support.
Electric valve for movement of boom/outriggers
does not operate (jams in the centre position). For remedy, refer to item 5.
16. Too low braking force
Too much play in the brake system. Adjust the brake system (see point "Wheel
brakes and bearings").
Brake linings not yet run-in. Pull the parking brake lever slightly and drive 2 -
3 kilometres.
Brake-shoes "glazed", dirty or oil on the friction
surfaces. Replace the brake-shoe sets.
Clean the friction surfaces of the brake drum.
Overrun brake jams. Lubricate.
Brake rod jammed or bent. Repair.
Brake wires rusty or broken. Replace wires.
17. Braking uneven and jerky
Too much play in the brake system. Adjust the brake system again (see point "Wheel
brakes and bearings").
Shock absorber of the overrun device faulty. Replace the shock absorber.
Reverse automatics - brake-shoe jams in the
carrier. Replace the brake-shoe in the carrier.
18. The brakes drag (only one of the wheels brakes)
Brake units wrongly adjusted. Readjust the brake units according to
instructions.
Also refer to point 17 for possible cause.
19. Lift brakes as the engine speed is decreased
Shock absorber of the overrun device faulty. Replace the shock absorber.
20. Reversing forced or impossible
Brakes have been adjusted too tight. Adjust the brake system (see point "Wheel
brakes and bearings").