Dinolift DINO 280RXT, Руководство по эксплуатации

Страница: 8 / 74

8
Operating instructions • DINO 280RXT
1.1. OVERVIEW OF THE UNIT
The unit is a wheeled, self-propelled aerial work platform. This aerial work platform complies
with the standard EN280 type 1, where driving is only allowed while the boom is in transport
position. The boom supported aerial work platform is operated from the control station on the
platform.
For lifting the unit is supported by its hydraulic stabilisers. They must be extended so that the
unit's wheels lift off the ground.
The lift's primary power source is a diesel engine. A mains-powered electric motor
is available as an auxiliary power source. The stabilisers and the boom system are
hydraulically powered.
Consult the chapters “Technical data" and “Structure and functions of the work platform" in
this manual for more detailed information about the lift.
1.2. INTENDED USE OF THE WORK PLATFORM
The aerial work platform is exclusively intended for transferring people and tools and acting
as a work platform within its permissible load-bearing capacity and reach (refer to the
“Technical Specifications” table and the “Reach Diagram”).
The intended use also covers:
• Following all the instructions in the Operating Instructions
• Performance of the inspections and maintenance operations.
This aerial work platform is NOT insulated, and does not offer protection against contact with
electric current. The aerial work platform must not be used for work on electric systems.
Observe the safety instructions concerning the operating environment, and the restrictions
given in them,
DANGER
WARNING
CAUTION
NOTICE
The operator must receive instructions and consent from the manufacturer for all such
specific work methods or conditions that the manufacturer has not explicitly defined in the
unit's operation and maintenance instructions.