Dinolift DINO 280RXT, Руководство по эксплуатации

Страница: 48 / 74

48
Operating instructions • DINO 280RXT
6. Lowering the platform to transport position
Before lowering the boom onto the transport support, retract the telescope completely
and turn the platform perpendicular to the boom.
7. When leaving the lift
• switch off the power unit
• prevent unauthorized use of the lift by removing the ignition key
5.2.4. Operating the boom from the chassis panel
The chassis panel is a secondary control station and only boom operations can be controlled
at UCB controls. All drive functions and stabiliser movements are controlled from the platform
control station.
1. Select the control position LCB with the key switch.
2. Activate control station with activation button
3. Select the fast movement speed if necessary. Light on
the upper left corner of the button is on while the fast
movement speed is selected.
4. Select direction of movement with selection buttons. The
button must be kept active throughout the operation.
5. Select the desired movement. The selected movement
moves at constant speed. The button must be kept active
throughout the operation.
54.1680