Dinolift DINO 280RXT, Руководство по эксплуатации

Страница: 42 / 74

42
Operating instructions • DINO 280RXT
4. Select the steering mode. 3 different steering modes can be selected.
The selected steering mode is shown with the signal lights on the
buttons.
2-wheel steering.
Only the foremost wheels turn.
4-wheel steering. Only available in slow driving speed range.
The front and rear wheels turn in opposite directions.
Crab steering. Only available in slow driving speed range.
All wheels turn in the same direction.
As different steering modes are engaged, the wheels on the rear axle will assume the
default position according to the selected steering mode once the steering or drive
controls are activated.
5. Activate the differential lock for better traction control if there is a
risk of one or more wheels slipping in rough terrain.
NOTICE! The machine must be stationary while engaging or disengaging the lock.
NOTICE! Tight turns with the differential lock on solid ground will require more power
from the engine and can generate a lot of heat in hydraulic system. Use the differential
lock only in rough terrain when there is a risk of one or more wheels slipping!
6. Activate the desired movement using the right control lever
7. Steer the machine with pressing the switches at the end of the
control lever.
S1
SELECT
O
I
P
Q1
NOTICE! The driving and turning directions will change if the turning device is reversed
with respect to the chassis.
DANGER
WARNING
CAUTION
NOTICE
The rotating wheels cause a crushing hazard!
Be aware of blind spots when driving or operating. Check that the
area is clear from outsiders.
>5°
>20°
P / D
MAX. 500 KG