No indicator
= System track power is OFF (Press PWR followed by N-)
Indicator On Steady
= System track power is ON (Press PWR followed
by Y+)
Blinking Indicator
= System is in “STOP” and track power is ON
(Press PWR followed by Y+ and Y+ again)
6.3.10 Tetherless Indicator
The tetherless indicator shows when your throttle is using either infrared or
radio communications.
6.3.11 L & R Semaphores-Cab Signaling
The L & R Semaphores are used when cab signaling is implemented on
the layout. More information about signaling and detection will be avail-
able on our web site, www.digitrax.com as these products become available.
Information on how to activate these indicators will be included in the manuals
for our detection and signaling products. Information will also be available
from other LocoNet Certified manufacturers when they have implemented
these features in their software.
The L & R Semaphores will display the following:
= Clear
= Approach
= Stop
6.4 FUNC Key
The FUNC Key
is used to enter function control mode. Function control
mode is the default mode for normal locomotive operation with the DT400.
Press this key during any throttle task to return to normal loco operation mode
with function controls active on the numeric keypad.
F U N C
Tetherless
Track Power
L & R Semaphores
45
