ALL ABOUT IMAGE RECOGNITION & PROCESSING
ALL ABOUT IMAGE RECOGNITION & PROCESSING
5. Operation
5. Operation
3. CAMERA SETUP
4
MOTION MASK SETUP : Set detection area.
Display of MOTION MASK SETUP
Display of Camera Setup
Display of CAMERA COLOR SETUP
1
COLOR SETUP : Adjust Camera Image
CH NUMBER
BRIGHTNESS
CONTRAST
SATURATION
HUE
GAIN
: Select camera
: Adjust screen brightness
: Adjust color contrast
: Adjust color saturation
: Adjust color hue
: Adjust image signal level
1. Press button to choose desired EDIT mode.
2. Use [LEFT]/[RIGHT] button to assign BLOCK, and press button to set.
3. MASK area in green color is detection area, and the rest is no detection area.
4. Detected area is indicated in Green, and not detected area is indicated as colorless.
5. With button, select channel (1,2,3,4,quad) to set for each camera.
(-31~ +32)
(-31~ +32)
(-20~ +32)
(-31~ +32)
(-31~ +32)
Right adjustment of each element in COLOR setup will increase picture quarterly displayed.
We recommend you to adjust each element of COLOR SETUP for cameras and monitor to be connected
to the DVMR unit, for better appearance.
Setup is possible only on the Full screen.
SELECT VER LINE : Select all in a vertical line.
CLEAR VER LINE : Clear all in a vertical line.
SELECT HOR LINE : Select all in a horizontal line.
CLEAR HOR LINE : Clear all in a horizontal line..
SELECT BLOCK : Select by BLOCK.
When button is pressed, [START] is displayed.
CLEAR BLOCK : Clear the BLOCK.
Then select blocks using direction button.
And press button to set.
2
TITLE SETUP : Input TITLE of each camera
1) Use [LEFT]/[RIGHT] button to select CHANNEL and
press button
2) Go into CHANNEL content and use [LEFT]/[RIGHT]
button to move to item to be changed and use
[UP]/[DOWN] button to change the letters.
When modification is finished, press button to come back to the MAIN MENU.
Display of CAMERA TITLE SETUP
SELECT ALL CELLS : Select all.
CLEAR ALL CELLS : Clear all.
17
22
