Digital Projection TITAN sx+ 3D, Руководство пользователя

Страница: 92 / 168

Page 4.42 Rev C April 2011
4. Controlling the projector
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
To adjust Manually:
Working on one projector at a
time, display a test pattern of
0% Field (black), set all four
border adjustments to zero,
then increase the size of each,
until the border disappears.
Non-Addressable Border
Around the edge of the DMD is a border of non-addressable ‘always off’ pixels.
Although ‘always off’, a small amount of stray light from these pixels can cause a
faint border around the projector image.
A small black level adjustment can be applied to remove this border.
Press and to select Non-Addressable Border.
Press and to select from:
Automatic (recommended)
Manual
Border Adjustment
Press and to select the edge that is to be adjusted.
For each edge, press and to adjust the slider (0 to 255).
•
•
Setup menu, projector Setup, Edge Blend continued