Digital Projection TITAN sx+ 3D, Руководство пользователя

Страница: 157 / 168

Rev C April 2011 Page 7.13
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual 7. Appendix
8. DVI-D Single/Dual/Twin input
24 way D-type connector
1 TMDS Data 2-
2 TMDS Data 2+
3 TMDS Data 2/4 Shield
4 TMDS Data 4-
5 TMDS Data 4+
6 DDC Clock
7 DDC Data
8 unused
9 TMDS Data 1-
10 TMDS Data 1+
11 TMDS Data 1/3 Shield
12 TMDS Data 3-
13 TMDS Data 3+
14 +5 V Power
15 Ground
16 Hot Plug Detect*
17 TMDS Data 0-
18 TMDS Data 0+
19 TMDS Data 0/5 Shield
20 TMDS Data 5 -
21 TMDS Data 5+
22 TMDS Clock Shield
23 TMDS Clock+
23 TMDS Clock-
* Hot plug detect (HPD) is fully DVI compliant. DVI sources detect the presence
of a display device by pro5V on pin 14 and looking for +5V on pin 16.
Whenever the projector is operational, and 5V is present on pin 14, pin 16 will be
held at +5V.
EDID is available even when the projector is switched off.
Operational means that the projector is powered up. Non operational states are
powered down and some self test and reprogramming modes.
High Definition Content Protection (HDCP) is supported on this input.
Notes
For important information about
how to control the projector
when Input 8 is being used, see
the final pages of Section 4.
Input 8 may not be present on
some models
pin view of female connector