Digital Projection TITAN sx+ 3D, Руководство пользователя

Страница: 62 / 168

Page 4.12 Rev C April 2011
4. Controlling the projector
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
Closing the shutter produces
a better black than simply
removing the signal, as the
light source will be completely
blocked by the shutter blade.
When the OSD is OFF:
- all menu navigation keys are
disabled.
- keys such as BrI
(brightness) will still function,
but the slider bars will not be
visible on screen.
When any of the three Lens
adjustment keys is pressed, the
blue Transmit indicator on the
remote control will light for 10
seconds:
- after 10 seconds, if no
adjustment has been made,
the indicator will go out and
the Lens adjustment key must
be pressed again to resume
adjustment.
- to end the adjustment before
10 seconds has elapsed, press
the key.
- all other adjustments will
be locked out until the Lens
adjustment is ended.
For more information about the
amount of lens shift available,
see section 2. Installation.
Using the control keys
Power
Press POWER and hold for 3 seconds, to switch the projector ON.
Press POWER and hold for 3 seconds, to switch the projector OFF.
Shutter
Press SHUTTER to OPEN the shutter.
Press SHUTTER to CLOSE the shutter.
On-Screen-Display
Press OSD to switch the On-Screen-Display OFF.
This includes ALL menus, controls and on-screen messages.
Press OSD to switch the On-Screen-Display ON.
Focus
Press followed by and to adjust the focus.
When adjustment is finished, press .
Zoom
Press followed by and to adjust the zoom.
When adjustment is finished, press .
Shift
Press followed by , , or to shift the lens up, down, left or
right.
When adjustment is finished, press .
•
•
•
•
•
•
•
•
•