Digital Projection TITAN sx+ 3D, Руководство пользователя

Страница: 120 / 168

Page 5.8 Rev C April 2011
5. Userware
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Orientation
Click on Orientation to select from the drop down menu.
Input
Click on Input to select from the drop down menu.
Test Pattern
Click on Test Pattern to select from the drop down menu.
Aspect Ratio
Click on Aspect Ratio to select from the drop down menu.
•
•
•
•
Notes
For more information about
input modes, see Overview,
in section 4. Controlling the
Projector.
Input 8 and 3D may not be
present on some models
The signal from input 8 will
be displayed in 3D, only if 3D
Enable is set to on: see 3D
Menu, later in this section.
For more information about
test patterns, see Setup menu,
in section 4. Controlling the
Projector.
For more information about
aspect ratios, see Picture
menu and Geometry menu,
in section 4. Controlling the
Projector.
Show page continued
Orientation
Input
Test
Pattern
Aspect
Ratio