Digital Projection TITAN sx+ 3D, Руководство пользователя

Страница: 142 / 168

Page 6.2 Rev C April 2011
6. Maintenance Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
Changing the air filters
The air filters should be changed only by authorised service personnel.
Contact your Digital Projection Dealer.
•
•
Changing the lamp module
The lamp module should be changed only by authorised service personnel.
Contact your Digital Projection Dealer.
•
•
Notes
Always allow the lamp to cool
for 5 minutes before:
- disconnecting the power
- moving the projector.
At the end of life, the lamp
will not strike, and the Lamp
Indicator on the control panel
will show red. (Typical lamp life
is 2000 hours)
Do not use the lamp for more
than 2000 hours, as this may
cause serious lamp failure,
damage the lamp module
and cause extra cost on
replacement.
HID lamps produce high
intensity light. Do not look
directly at the light coming
from the lamp housing or the
lens.
The filters should be changed
at the same time as the lamp is
changed.
The air filters should be
changed regularly:
- In a clean environment such
as an office, change after 2000
hours, at the same time as the
lamp is changed.
- In a dusty or smoky
environment such as a theatre
or public area, more frequent
changes may be necessary.