Digital Projection TITAN sx+ 3D, Руководство пользователя

Страница: 86 / 168

Page 4.36 Rev C April 2011
4. Controlling the projector
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
Keystone adjustment can be
found in both the Geometry and
Projector Setup menus.
The Keystone adjustment is
NOT available for Input 8.
The range of adjustment will
be dependent on the input
resolution.
Some computer graphics cards
do not recognise the EDID
Extension block.
If you are having problems
booting a computer connected
to the projector:
turn the computer OFF
set DVI EDID Extension Block
to Disable
turn the computer back ON
again
•
•
•
Keystone
Used to correct for distortion caused by the projector being mounted higher or lower
than the screen.
Press and to select Keystone.
Press and to adjust the slider.
DVI EDID Extension Block
Press and to select DVI EDID Extension Block.
Press and to select from:
Enable
Disable
•
•
Setup menu, projector Setup continued