Digital Projection TITAN sx+ 3D, Руководство пользователя

Страница: 71 / 168

Rev C April 2011 Page 4.21
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
4. Controlling the projector
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
Some menu controls can be
accessed directly using the
control keys (see earlier in this
section).
For more information about
input modes and input presets,
see earlier in this section, Input
modes and settings.
The lens settings are the only
settings saved for Input 8.
Input Menu
Presets
Input Menu
Presets
Recall Presets A ~ H
The lens settings, ie Focus
position, Zoom position and
Shift, are included only for the
first ten presets.
The lens settings are the only
settings recalled for Input 8.
Presets
Sixteen sets of parameters can be saved and recalled (A – S) . The parameters
saved for each Preset are:
all settings from the Picture menu,
all settings from the Input menu
all settings from the Geometry menu, except Keystone
all settings from the Colour menu, except the Global settings
all lens position, focus and zoom settings
Press and to select Presets.
Press to open the Presets submenu.
recall presets
Press and to select Recall Preset.
Press to open the Recal Presets A ~ H submenu. Any presets that have
been saved are indicated by their description, for example D: in this example.
To recall a set of parameters that has been saved, press and to select
one of the Presets.
For Presets J to S, select Recall Preset J ~ S then press to open the
J~S submenu. Press and to select the Preset.
Press to confirm your selection.
The Preset parameters will be loaded.
•
•
•
•
Input menu continued