Digital Projection HIGHlite 10000Dsx+, Руководство пользователя

Страница: 78 / 96

E-78
8. Appendix
1
Troubleshooting
This section helps you resolve problems you may encounter while setting up or using the projector.
Power Indicator
Indicator Condition Projector Condition Note
Off
Blinking light
Steady light
Green blinking
Orange blinking
0.5 sec ON,
0.5 sec OFF
2.5 sec ON,
0.5 sec OFF
0.5 sec ON,
0.5 sec OFF
2.5 sec ON,
0.5 sec OFF
The main power is off
The projector is getting ready to turn on.
The lens shutter is closed.
Off Timer or Sleep Timer is active.
The projector is cooling down.
On Timer is active.
The projector is turned on.
The projector is in Standby.
Green
Orange
–
Wait for a moment.
–
Wait for a moment.
–
–
–
Indicator Condition Projector Condition Note
Off
Blinking light
Steady light
Red blinking
Red
Orange
Green
1 cycle (0.5 sec ON,
2.5 sec OFF)
2 cycle (0.5 sec ON,
0.5 sec OFF)
3 cycle (0.5 sec ON,
0.5 sec OFF)
4 cycle (0.5 sec ON,
0.5 sec OFF)
6 cycle (0.5 sec ON,
0.5 sec OFF)
Normal
Lens hood or lamp cover error
Temperature error
Power error
Fan error
Lamp error
Circuit error
Control key locked
Idle condition
–
Replace the lens hood or the lamp cover
correctly.
The projector is overheated. Move the
projector to a cooler location.
Power unit will not work correctly.
Cooling fan has stopped. Contact your
dealer.
Lamp fails to light. Wait 3 minutes and
then turn on again.
An error occurs in the circuit. Consult
your dealer.
You have pressed control panel key when
Control Key Lock is enabled.
–
Status Indicator
Please ask your delivery outlets to handle the error codes.
Error No. Error Messages Description
0005
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
Set Temp.
Fan Stop
Lamp PS Temp.
Lamp Temp.
Lamp Off
DMD Status
DMD Temp.
Lamp Fan Stop
Pump Stop
Power Supply
Lamp Time Warn
Temprature malfunction
in internal set
Fan stop
Temprature malfunction
on Lamp PS
Temprature malfunction
on Lamp
No lamp lighting
DMD malfunction
DMD temprature malfunc-
tion
Lamp fan stop
Pump stop malfunction
Power supply mulfunction
Lamp time over (warning)
Error No. Error Messages Description
0001
0002
0003
0004
Cover Open
Lamp Data
Lamp Time Over
FPGA JOE2P
FPGA JOE2S
FPGA DVIOUT
FPGA WARPSEL
FPGA WARP
FPGA DVI1
FPGA DVI2
FPGA DVI3
FPGA DVI4
FPGA SDI1
FPGA SDI2
FPGA SDI3
FPGA SDI4
FPGA SLOTSEL
FPGA OSD
Cover open or TIMER
PWB contact failure
Malfunction on lamp data
Lamp time over (power-off)
FPGA configuration error