Digital Projection HIGHlite 10000Dsx+, Руководство пользователя

Страница: 11 / 96

E-11
2
Features
• HDTV support, suited to 3D movement and telecine, with
I/P conversion
I/P conversion processing using an interpolation circuit suited
to 3D movement that supports HDTV and SDTV signal input
as well as telecine signals permits reproduction of images hav-
ing impressive definition.
• Full 10 bit image processing circuit
The image processing circuit features 10 bits for each color.
As a result, there is complete 10 bit processing when the sig-
nal is input from the optional SDI interface slot which will pro-
vide image quality having a high tonal quality.
• Equipped with 4 slots which can accommodate 4 types of
interface boards
This Projector is equipped with 4 slots which permit the inser-
tion of the following 4 types of optional interface boards. Mul-
tiple interface boards of the same type can also be inserted.
Connectors of the Various Boards
MM-VIDEO* .... CVBS input connector (BNC), S-Video in-
put connector (BNC 2 conductors), Com-
ponent video input connector (BNC 3 con-
ductors)
MM-RGB* ....... RGB input connector (BNC 5 conductors)
MM-DVI ........... DVI-D input connector (DVI-D 24 pin)
MM-SDI ........... SDI input connector (BNC)
⳯
2, monitor out-
put connector (BNC)
* When shipped from the factory this Projector is loaded with
one MM-VIDEO board and one MM-RGB board.
• High contrast images with DigiView - SweetVision TM func-
tion
This Projector is equipped with the DigiView - SweetVision
TM
function which utilizes the characteristics of the human eye to
provide an image quality with a sense of contrast.
• LAN port is standard equipment and wireless LAN is sup-
ported
Connection of a commercially available LAN cable (Ethernet
cable) to the LAN port (RJ-45) permits control of this Projector
from the personal computer via the LAN.
• Seamless Switching Function
Mounting of the MM-IMGPRO and MM-SCALING options per-
mits the switching of signals between two input interface
boards.
Alpha Blending, Wipe, and Box In/Out image effects can be
selected at the time of switching.
• DigiBlend - Edge Blending Function
When two or more projectors are used to project images lined
up horizontally or vertically, a blending adjustment can be per-
formed to make the borders of the adjacent images less con-
spicuous.
The gamma curve that is adjusted to the input source can be
set between 1.0 and 3.0, and 256 gradations can be expressed.
1. Introduction
• DigiWarp - Geometric Warp Correction Function
In the case pictures are projected on particular shaped screens
(cylindrical or spherical), geometric warp can be corrected by
implementing MM-WARP (optional).
• Dust Control of DMD
Contamination of the DMD is prevented using a dust control
system to stop the ingress of dust, oil and smoke particles in
the air getting onto the DMD surface which can affect the qual-
ity of the projected image.
• Fluid Cooled DMD
The DMD temperature is controlled more efficiently by the use
of fluid a cooling system.
• Tilt and PAN Function with Stacking frame
Projectors can be stacked vertically upto two high by built-in
frame interface connectors.
When projectors are stacked, image alignment can be ad-
justed for up/down tilt, left/right tilt and fine adjustment of PAN
(left to right rotation).
NOTE: The frame is not included on HIGHlite 1.