Digital Projection HIGHlite 10000Dsx+, Руководство пользователя

Страница: 90 / 96

E-90
8
Using Software Keyboard
1 to 0 and Characters
........................ Use to type in IP address or projector name
MODE ............. Selects one of three modes for alphabet and spe-
cial characters.
SP ................... Inserts a space
BS ................... Deletes one character backward
F
..................... Returns to the previous
E
..................... Advances to the next
OK ................... Executes the selection
Cancel ............. Cancels the selection
8. Appendix
9
Operation Using an HTTP Browser
Overview
The use of HTTP server functions will allow control of the Projec-
tor from a web browser without the installation of special soft-
ware. Please be sure to use “Microsoft Internet Explorer 4.x” or a
higher version for the web browser. (This device uses “JavaScript”
and “Cookies” and the browser should be set to accept these
functions. The setting method will vary depending on the version
of browser. Please refer to the help files and the other informa-
tion provided in your software.)
NOTE:
* The use of HTTP server functions is not available during Standby mode.
* The display’s or button’s response can be slowed down or operation may not be
accepted depending the settings of your network. Should this happen, consult
your network administrator.
* The Projector may not respond if its buttons are repeatedly pressed in rapid
intervals. Should this happen, wait a moment and repeat. If you still can’t get any
response, pull out and then re-insert the LAN card.
Access is gained to the HTTP server functions by specifying
http:// <the Projector’s IP address> /index.html
in the entry column of the URL.
Preparation Before Use
Make network connections and set up the Projector and confirm
that it is complete before engaging in browser operations. (See
“LAN Mode” on page E-62.)
Operation with a browser that uses a proxy server may not be
possible depending on the type of proxy server and the setting
method. Although the type of proxy server will be a factor, it is
possible that items that have actually been set will not be dis-
played depending on the effectiveness of the cache, and the con-
tents set from the browser may not be reflected in operation. It is
recommended that a proxy server not be used unless it is un-
avoidable.
Handling of the Address for Operation via a Browser
Regarding the actual address that is entered for the address or
entered to the URL column when operation of the Projector is via
a browser, the host name can be used as it is when the host
name corresponding to the IP address of the Projector has been
registered to the domain name server by a network administra-
tor, or the host name corresponding to the IP address of the Pro-
jector has been set in the “HOSTS” file of the computer being
used.
Example: When the IP address of the Projector is “192.168.73.1”,
access is gained to the HTTP server functions by specifying
http://192.168.73.1/index.html for the address or the entry
column of the URL.