Digital Equipment LA400plus, Руководство пользователя

Страница: 72 / 299

The Function of the Buttons in Set-Up Mode
As explained previously, the function of the button mainly depends on the operating mode. The
printer state also affects the specific function purpose. By definition, you access the following
button functions in Set-Up mode, that is after pressing the
Set-Up
button.
Button Functions Purpose
Park
- With the Push-Rear or Push-Front Paper Paths, to park the paper.
- With the Pull tractor, advances the paper.
Note: This function is no longer active once you enter Set-Up.
See "Handling Continuous Form" in Chapter 3.
Print
Pressing this button the printer prints the firmware version of your
printer and the list of set-up features of the four macros and their
associated values.
Note: This function is no longer active once you enter Set-Up.
See "Printing the Printer Configuration" in Chapter 6.
Top of Form
To access the Top of Form mode.
Note: This function is no longer active once you enter Set-Up.
See "Adjusting the Top of Form from the Operator Panel" in Chapter 5.
D
In Set-Up, to navigate downwards (through Functions, Options,
Sub-options and Values).
See "How to Configure Your Printer" in Chapter 6.
U
In Set-Up, to navigate upwards (through Functions, Options,
Sub-options and Values).
See "How to Configure Your Printer" in Chapter 6.
R
In Set-Up, to navigate at the same level to the next item.
See "How to Configure Your Printer" in Chapter 6.
Getting to Know Your Printer
2-16