Digital Equipment LA400plus, Руководство пользователя

Страница: 151 / 299

SELECT-IN Signal
The
SLCT-IN SIGNAL
Option allows you to determine if the parallel interface ignores the
SELECT-IN signal or not.
Value Definition
Disabled
The parallel interface ignores the SELECT-IN signal.
Enabled
The parallel interface uses the SELECT-IN signal.
Setting the Serial Interface
Disconnection on Fault
The
DISCON. ON FAULT
Option defines the DTR line behaviour for any fault condition
detected by the printer.
Value Definition
No discon.
The DTR line does not change.
Yes (DTR drop)
The DTR line is dropped to low signal level.
Yes (DTR pulse)
The DTR line is pulsed to high signal level with a 5 sec pulse.
Word Length
The WORD LENGTH Option allows you to determine the data format.
Value Definition
8 bit
The data are coded using 8 bit.
7 bit
The data are coded using 7 bit.
Baud Rate
The
BAUD RATE
Option allows you to set the transmission speed used for the communication
between the printer and the host. Ensure that the Value matches your host settings.
Value Option
600 bps 600 bits per seconds.
1200 bps 1200 bits per seconds.
2400 bps
2400 bits per seconds.
4800 bps
4800 bits per seconds.
Configuring Your Printer
6-20