Digital Equipment LA400plus, Руководство пользователя

Страница: 186 / 299

Adjusting the Position of the First Printable Line
The positioning of the continuous form fed with the tractor unit in Front Position or with the
tractor unit in Rear position in Push mode can be finely adjusted with the
LINE #1-FRONT
or
the
LINE # 1-REAR
respectively.
To adjust these values, insert paper on the paper path for which you want to change the position
of the first printable line and proceed as follows:
1. Enter the
USER ADJUSTMENTS
Function as described before and select the
LINE #1-FRONT
or
LINE # 1-REAR
Option according to the tractor position.
The display shows the current value ath the actual corresponding position.
2. Display the desired Value and press the Sel/Save button.
The printer parks the paper, loads it again and prints the current Value
①
at the actual
corresponding position. The paper is then moved to the viewing position. For example, for the
value 1/60 inches, the printer prints ** 1/60"**. This allows you to check the current position.
Note: See Chapter 6 "Configuring Your Printer" for details on how to navigate in Set-Up mode.
3. If the current Value is not acceptable, choose another value and press the Sel/Save button.
The same printing procedure is peformed again.
4. Once you have selected the proper Value, press the Exit button to save modification.
The display reads Save Config.
5. Press Sel/Save button to permanently save your modification.
1
First Printable Line Adjustment
Adjusting Your Printer
9-3