Digital Equipment LA400plus, Руководство пользователя

Страница: 296 / 299

International Standards Conformity
Federal Communications Commission (FCC) Statement:
The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15B of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC warning: Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Notes
The use of a nonshielded parallel interface cable with the referenced device is prohibited. The length of the parallel
interface cable must be 3 meters (10 feet) or less. The length of the serial interface cable must be 600 meters (1970
feet) or less.
The length of the power cord must be 3 meters (10 feet) or less.
Notice to Canadian Users
The digital apparatus does not exceed the class B limits for radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils
numériques de classe B prescrites dans le règlement sur le brouillage radioélectriques édicté par le ministère des
Communications du Canada.
Hinweis für deutsche Benutzer
Schallemissionswerte
Vorläufige Wertangaben nach ISO 9296 und ISO 7779/DIN EN 27779:
Schalleistungspegel
LwdAd, B Schalldruckpegel
LpAm, dBA
(Zuschauerposition)
Leerlauf Betrieb Leerlauf Betrieb
-- 7,1 -- 57
(Aktuelle Werte für spezielle Ausrüstungsstufen sind über di Digital Equipment Vertretungen erhältlich. 1 B = 10 dBA).
Declaration of Conformity (European version only)
We, Digital Equipment Corporation, declare under our sole responsibility that this printer is in conformity with the
following directives and standards:
•
89/336/EEC on Electromagnetic Compatibility based on compliance to:
–
EN55022:4.87 Class B radio frequency emissions
–
EN50082-1:1.92 Immunity
•
73/23/EEC on the Safety of Low Voltage Equipment based on compliance to:
–
EN60950 Safety of Information Technology Equipment
•
93/68/EEC on the Labeling of Equipment