Digital Equipment LA400plus, Руководство пользователя

Страница: 124 / 299

Reducing the Print Noise Level
To print with a reduced noise level (Quiet mode).
•
Press the
Quiet
button.
The display shows
Quiet
instead of the current printer state.
To return to Normal mode:
•
Press the
Quiet
button again.
The display shows printer state that was active before pressing the
Quiet
button.
Recovering from a Fault State
Recovering from a Paper out Fault
If the printer is out of paper, the Fault and Ready indicators are lit and the display shows the
Load X message, where X is the current Paper Path.
1. Make sure that paper is loaded in the current paper path.
2. Press the
FF/Load
button.
The display shows
Loading paper...
and paper is loaded.
Note: If no paper is installed in the current Paper Path, see Chapter 3 "Handling Different
Paper Types" for the paper installation procedure.
Recovering from other Faults
To recover from any other Fault state:
1. Remove the cause of the Fault state.
2. Press the Pause button, to clear the Fault state.
Note: It may happen, that two Fault states occur at the same time. In this case press the Pause
button repeatedly, until both of them are cleared.
Operating Your Printer
4-6