Digital Equipment HA3000, Руководство по установке

Страница: 37 / 96

HA3000 UPS RECEIVING AND HANDLING 3–3
3.3.1 Removing Unit from Truck
Use a pallet mover or a forklift to move the HA3000 series UPS shipping pallet from the
shipping truck to the loading dock.
3.3.2 Removing Shipping Carton
1. Cut the two plastic bands that secure the shipping carton to the pallet.
2. Following the directions on the shipping carton, cut two adjacent vertical edges of
the shipping carton, raise the panel between the vertical cuts, and push the shipping
carton off of the HA3000 series cabinet.
3. Slide the plastic shipping bag off the cabinet.
4. Open the fastened door on the cabinet with the supplied key, and verify that the
equipment nameplate on the inside of the door corresponds to the equipment required
for the specific site.
5. Close the door and replace the plastic shipping bag on the cabinet.
NOTE
Carefully inspect the packing materials for additional hardware before
discarding.
3.3.3 Removing Unit from Pallet
1. Remove the two corner boards from each vertical edge of the HA3000 series cabinet.
2. Remove the four mounting brackets that secure the HA3000 series cabinet to the
shipping pallet.
a. Use a 9/16-inch wrench to remove the bolts that secure the mounting brackets to
the pallet.
b. Use a Phillips screwdriver to remove the screws that secure the mounting
brackets to the HA3000 series cabinet.
3. Use a rolla-lift pair to remove the HA3000 series cabinet from the shipping pallet.
This requires at least two people.
a. Place four corner boards across the top of each rolla-lift half to prevent damaging
the front and rear panels.
b. Place one half of the rolla-lift on the front side and the other half of the rolla-lift
on the rear side of the HA3000 series cabinet.
c. Gradually tighten the strapping between the rolla-lift halves until they are
resting securely against the HA3000 series cabinet.
d. Raise both rolla-lift halves simultaneously until the four casters are above the top
surface of the pallet.
e. Pull the pallet out from under the HA3000 series cabinet, or roll the HA3000
series cabinet to the side, until it is clear of the pallet.