Digital Equipment HA3000, Руководство по установке, Страница: 36 / 96

3–2 HA3000 UPS RECEIVING AND HANDLING
3.3 HANDLING
The HA3000 series of UPS equipment is designed for handling primarily from the
bottom (Figure 3–1). For HA3000 series UPS cabinet dimensions and weights, refer to
Chapter 2. The individual cabinets are mounted on a shipping pallet and covered by a
cardboard shipping carton. They are designed to be moved by a pallet mover, a rolla-lift
(Models M-4, M-4-6, or CD-6), or a forklift-type truck. The front and rear lower cover
plates of each cabinet are removed for shipment. The HA32A UPS cabinet has a draw-
out input air filter located under the enclosure, which is also removed for handling or
transit. The UPS draw-out input air filter can be pulled out from beneath the enclosure
once the front lower cover plate is removed.
The HA3000 series equipment cabinets can be handled or moved by overhead equipment
after they have been fitted with the necessary slings and spreaders (Figure 3–1).
Use the following procedures to move the HA32A UPS cabinet, the HA32B UPS Battery
Cabinet, the HA32C/D/E UPS Auxiliary Cabinet, the HA33D/F UPS CSA Cabinet, or
the HA32J/K UPS Distribution Cabinet from the shipping truck to the final installation
position. This procedure is a general guideline, and all safety precautions should be
followed.
FROM THE TOP
SPREADERS
SHIPPING
CARTON
SHIPPING
PALLET
FROM THE BOTTOM
SHIPPING
CARTON
SHIPPING
PALLET
MKV-A2207-91
Figure 3–1 Handling the HA3000 Series Cabinets