Digital Equipment HA3000, Руководство по установке

Страница: 35 / 96

3
HA3000 UPS RECEIVING AND HANDLING
3.1 GENERAL
This chapter contains the procedures for receiving and handling the HA3000 series
equipment cabinets.
The handling of the HA3000 series equipment cabinets is the responsibility of the
trucker/mover/rigger, and should be considered part of inside delivery.
The following is a list of the equipment and tools needed for moving and handling the
HA3000 series cabinets.
• Pallet mover or forklift
• Rolla-lift (Models M-4, M-4-6, or CD-6)
• 9/16-inch wrench
• Phillips screwdriver
• 5/8-inch wrench
• 1/2-inch wrench
• 3/8-inch wrench
3.2 RECEIVING
Inspect the exterior of all shipping containers and the equipment for damage that may
have occurred during transit. If the shipping containers or equipment show evidence
of damage, note the damage on the receiving document before signing for receipt of
equipment.
The equipment should be unpacked immediately after receipt, and inspected again to
determine if any internal shipping damage has occurred. Verify that the equipment
nameplates correspond with the equipment ordered.
Damage claims should be filed directly with the carrier. Replacements for damaged
components should be ordered through the local Digital Services account representative.
3–1