Digital Equipment DEClaser 320, Руководство по обслуживанию

Страница: 361 / 400

B.2 Print Media
Table B–4 Transparency Specifications
Category Specification
Transparency weight 142
6
4 g/m
2
basis weight
Thickness 0.105±0.005 mm
Material Polyester (coated)
Curl 5.0 mm
B.2.3.1 Special Considerations When Printing on Transparencies
Observe the following requirements when printing on transparencies:
• Feed transparencies from the manual feed tray one at a time.
• Remove transparencies from the output tray as each one is printed to
prevent them from sticking to each other.
B.2.4 Label Specifications
A self-adhesive label consists of a face sheet, an adhesive sheet, and a carrier
sheet. The carrier sheet and adhesive used for the labels must be able to meet
the heat tolerance specification of 150°C (302°F) for at least 0.1 second.
Caution: Exposed adhesive on labels can cause damage to the printer. To test
for adhesive that may be exposed, press a plain piece of paper on top of the sheet
of labels. If the paper sticks to the labels, do not use those labels.
Table B–5 contains information on the sizes and specifications of self-adhesive
labels that can be used with the DEClaser 3200 printer.
Table B–5 Self-Adhesive Label Specifications
Category Specification
Face sheet 51
6
4 g/m
2
basis weight
Backing sheet 50
6
3 g/m
2
basis weight
Face sheet adhesive coating 15.5
6
2.5 g/m
2
basis weight
Total basis weight 116.5
6
9.5 g/m
2
Total thickness 0.125
6
0.010 mm
Moisture content 4.5% to 7.0%
DEClaser 3200 Specifications B–5