Digital Equipment DEClaser 320, Руководство по обслуживанию

Страница: 97 / 400

5.11 0701 ADD PAPER TO TRAY 1
• 4-pin plug that connects to P/J33 (see Figure 5–11) on the DC control
board. Pin three of P/J33 goes high when the sensor is actuated.
4. Swap the following:
• DC control board
• Upper paper out sensor
• Upper cassette-size sensor assembly
5.12 0702 ADD PAPER TO TRAY 2
Description: This code and text is displayed when the lower cassette-empty
sensor finds the lower cassette empty. A spring underneath the cassette
elevator lifts the stack into the sensor arm. The sensor connects through the
lower size-sensing sensor assembly to 4-pin, P/J43 on the DC control board, as
shown on Figure 5–12.
Figure 5–12 702 Error
Lower-Size
Sensing
Assembly
4-Pin
MLO-006675
16-Pin
P/J 34
Lower
Paper
Out
Troubleshooting: Test the upper paper out sensor by entering the 1701
test code 0722, as shown in Section 3.1.3. When the test is sensing, open the
feeding side door and manually actuate the lower feed sensor. Perform the
following procedure:
1. Make sure the lower cassette is fully pushed in.
2. Verify the condition of the cassette by swapping cassettes from tray 2 to
tray 1.
Display Error Code FIPs 5–19