Digital Equipment DEClaser 320, Руководство по обслуживанию

Страница: 95 / 400

5.9 0600/0601 CALL SERVICE
2. If the motor test mentioned above fails, swap the scanner interlock switch.
3. Swap the following components:
• DC control board
• Scanner assembly
• LVPSA
5.10 0700 ADD PAPER TO MANUAL
Description: This error code is displayed during manual feeding and prompts
you to load paper into the manual slot. When the registration sensor detects
the leading edge of the sheet, the printer will grab it and print the sheet.
Troubleshooting: Suspect the registration or bypass sensor. Test both
sensors by entering the 1701 test codes, 0710 for the bypass and 0810 for the
registration. Perform the following steps to fix a problem.
Figure 5–10 700 Error
P/J 71
Developer Interconnect
Board
MLO-006645
P/J 34
1. Refer to Figure 5–10 and inspect the following for damage, misconnection,
or mechanical damage:
• 2-pin, P/J71 plug connecting to P/J71 on the developer interconnect
board
• 10-pin jack that connects to P34 on the DC control board. Pin three of
P34 goes high when the sensor is actuated.
• Manual feed sensor linkage
• Manual feed sensor mounting
2. Swap the following components:
• Manual feed sensor
• Developer interconnect board
Display Error Code FIPs 5–17