Digital Equipment DEClaser 320, Руководство по обслуживанию

Страница: 55 / 400

3.1 1701 Special Function and Test Codes
3.1.2 1701 Special Function Codes
Table 3–1 lists all codes and the information they provide. To read or alter the
values, you must enter the 1701 menu, as shown in Section 3.1. Use
^
,
>
,
and
_
to enter the code and alter the value. Press
3
to select the value and
automatically save it in NVRAM.
Note: For this function to work, you must select DEC PPL3 protocol, as shown
in Section 2.4.
Table 3–1 1701 Special Function Codes
Code Definition of Function Display Panel/Comment
0281.00
1
The total number of prints 0000475
0281.10
1
0281.11
1
0281.12
1
Set/read bypass or manual slot 3
Set/read upper cassette slot 1.
Set/read lower cassette slot 2. 8X10 215X315
B4 A4
LEGAL LETTER
8.5X13 251X275
210X330 MONARCH
0281.20
1
(Function does not work) English or 2’nd language.
0281.30
1
Set/read contrast or the LCD display. $00–0F
0281.40
1
Beeper control ON–OFF
0282.01
0282.01 Horizontal Registration set menu. See Section 10.3 for the
adjustment procedure
0282.02
0282.02 Vertical Registration set menu. See Section 10.4 for the
adjustment procedure.
0282.03 Read print cartridge identification (ID) MCU:$10 CRU:$10
0282.04 Read developer cartridge ID MCU:$10 CRU:$10
0282.05
2
Read toner cartridge ID MCU:$10 CRU:$10
0282.06
3
Show print cartridge status X:ID=90/03/01
SUMiDA-B Sim-B1
0282.07
3
Show developer cartridge status D:ID=10:90/03/01
SUMiDA-B Sim-B1
1
This direct code can be entered from the 0000 prompt, without entering the 1701 code.
2
The displayed identification code should read $10 which is the value stored in NVRAM.
3
Status codes show the type and production date of the cartridge and are useful for tracking
defective supplies.
(continued on next page)
Service Menus and Tests 3–3